dryriver writes "Global personal computer (PC) sales have fallen for the fifth quarter in a row, making it the 'longest duration of decline' in history. Worldwide PC shipments totalled 76 million units in the second quarter, a 10.9% drop from a year earlier, according to research firm Gartner. PC sales have been hurt in recent years by the growing popularity of tablets. Gartner said the introduction of low-cost tablets had further hurt PC sales, especially in emerging economies. 'In emerging markets, inexpensive tablets have become the first computing device for many people, who at best are deferring the purchase of a PC,' said Mikako Kitagawa, principal analyst at Gartner, said in a statement."

Nerval's Lobster writes "Just in case you haven't been keeping up with the latest in five-dimensional digital data storage using femtocell-laser inscription, here's an update: it works. A team of researchers at the University of Southampton have demonstrated a way to record and retrieve as much as 360 terabytes of digital data onto a single disk of quartz glass in a way that can withstand temperatures of up to 1000 C and should keep the data stable and readable for up to a million years. 'It is thrilling to think that we have created the first document which will likely survive the human race,' said Peter Kazansky, professor of physical optoelectronics at the Univ. of Southampton's Optical Research Centre. 'This technology can secure the last evidence of civilization: all we've learnt will not be forgotten.' Leaving aside the question of how many Twitter posts and Facebook updates really need to be preserved longer than the human species, the technology appears to have tremendous potential for low-cost, long-term, high-volume archiving of enormous databanks. The quartz-glass technique relies on lasers pulsing one quadrillion times per second though a modulator that splits each pulse into 256 beams, generating a holographic image that is recorded on self-assembled nanostructures within a disk of fused-quartz glass. The data are stored in a five-dimensional matrix—the size and directional orientation of each nanostructured dot becomes dimensions four and five, in addition to the usual X, Y and Z axes that describe physical location. Files are written in three layers of dots, separated by five micrometers within a disk of quartz glass nicknamed 'Superman memory crystal' by researchers. (Hitachi has also been researching something similar.)"

Barence writes "Dropbox has kicked off its first developer conference with the stated goal of replacing the hard disk. 'We are replacing the hard drive,' said Dropbox CEO Drew Houston. 'I don't mean that you're going to unscrew your MacBook and find a Dropbox inside, but the spiritual successor to the hard drive is what we're launching.' The new Dropbox Platform includes tools for developers that will allow them to use Dropbox to sync app data between devices. The company's new APIs will also make it easier for app developers to include plugins that save to Dropbox, or choose files stored in the service for use within apps."

Doofus writes "Masao Yoshida, director of the Daichii Fukushima nuclear plant in Japan, has passed away. Colleagues and politicos in Japan praised his disobedience during the post-tsunami meltdown and credited him with preventing much more widespread and intense damage. From the article: 'On March 12, a day after the tsunami, Mr. Yoshida ignored an order from Tepco headquarters to stop pumping seawater into a reactor to try and cool it because of concerns that ocean water would corrode the equipment. Tepco initially said it would penalize Mr. Yoshida even though Sakae Muto, then a vice president at the utility, said it was a technically appropriate decision. Mr. Yoshida received no more than a verbal reprimand after then-Prime Minister Naoto Kan defended the plant chief, the Yomiuri newspaper reported. "I bow in respect for his leadership and decision-making," Kan said Tuesday in a message posted on his Twitter account.'"

ph4cr writes with news that a few researchers have discovered an alloy that allows them to print 3D structures from liquid metal at room temperature. From the article: "'It's difficult to create structures out of liquids, because liquids want to bead up. But we’ve found that a liquid metal alloy of gallium and indium reacts to the oxygen in the air at room temperature to form a "skin" that allows the liquid metal structures to retain their shapes,' says Dr. Michael Dickey, an assistant professor of chemical and biomolecular engineering at NC State and co-author of a paper describing the work. ... One technique involves stacking droplets of liquid metal on top of each other, much like a stack of oranges at the supermarket. The droplets adhere to one another, but retain their shape – they do not merge into a single, larger droplet. ... Another technique injects liquid metal into a polymer template, so that the metal takes on a specific shape. The template is then dissolved, leaving the bare, liquid metal in the desired shape. The researchers also developed techniques for creating liquid metal wires, which retain their shape even when held perpendicular to the substrate." The paper is available online. There's also a video of the process in action, below the fold.

MojoKid writes "big.LITTLE is ARM's solution to a particularly nasty problem: smaller and smaller process nodes no longer deliver the kind of overall power consumption improvements they did years ago. Before 90nm technology, semiconductor firms could count on new chips being smaller, faster, and drawing less power at a given frequency. Eventually, that stopped being true. Tighter process geometries still pack more transistors per square millimeter, but the improvements to power consumption and maximum frequency have been falling with each smaller node. Rising defect densities have created a situation where — for the first time ever — 20nm wafers won't be cheaper than the 28nm processors they're supposed to replace. This is a critical problem for the mobile market, where low power consumption is absolutely vital. big.LITTLE is ARM's answer to this problem. The strategy requires manufacturers to implement two sets of cores — the Cortex-A7 and Cortex-A15 are the current match-up. The idea is for the little cores to handle the bulk of the device's work, with the big cores used for occasional heavy lifting. ARM's argument is that this approach is superior to dynamic voltage and frequency scaling (DVFS) because it's impossible for a single CPU architecture to retain a linear performance/power curve across its entire frequency range. This is the same argument Nvidia made when it built the Companion Core in Tegra 3."

DeviceGuru writes with a snippet from LinuxGizmos: "A Linux-based digital pen from German startup Lernstift will go live on Kickstarter on July 10 for about 115 Euros, or $148. The Lernstift pen incorporates an ARM Cortex processor, a WiFi module, and a motion sensor, and is designed to correct penmanship, spelling, and grammar errors as you write. A set of 3D motion sensors, including a gyroscope, accelerometer, and magnetometer help the smartpen's embedded Linux computer calculate the pen's 3D movements and generate 2D vectors. Kickstarter supporters pledging 99 Pounds (about 115 Euros, or $148 U.S.) will receive the first shipment of pens later this year, and standard pricing is expected to start at 130-150 Euros when production devices ship in early 2014."

FuzzNugget writes "After the Economic Development Administration (EDA) was alerted by the DHS to a possible malware infection, they took extraordinary measures. Fearing a targeted attack by a nation-state, they shut down their entire IT operations, isolating their network from the outside world, disabling their email services and leaving their regional offices high and dry, unable to access the centrally-stored databases. A security contractor ultimately declared the systems largely clean, finding only six computers infected with untargeted, garden-variety malware and easily repaired by reimaging. But that wasn't enough for the EDA: taking gross incompetence to a whole new level, they proceeded to physically destroy $170,500 worth of equipment (PDF), including uninfected systems, printers, cameras, keyboards and mice. After the destruction was halted — only because they ran out of money to continue smashing up perfectly good hardware — they had racked up a total of $2.3 million in service costs, temporary infrastructure acquisitions and equipment destruction."

DavidGilbert99 writes "Jeri Ellsworth has opened up about her time at games developer Valve and has hit out strongly at the so-called flatpack management structure. She says that despite Valve's claims of a democratic structure, there is a layer of powerful management in place and when she was fired she felt like she had been stabbed in the back. 'If I sound bitter, it's because I am. I am really, really bitter. They promised me the world and then stabbed me in the back.'" Develop Online has a good transcript. In the end, Gabe Newell at least let her team keep the rights to their augmented reality hardware. She also notes that she still loves Valve, but the management and bonus structure resulted in communication breakdowns at Valve's size. It does seem that a flat structure can work: Andy Wingo has been weblogging about working at Igalia and seems pretty positive about the experience.

cylonlover writes "Li-ion batteries may be ok for your smartphone, but when it comes to large-scale energy storage, the priorities suddenly shift from compactness and cycling performance (at which Li-ion batteries excel) to low cost and environmental feasibility (in which Li-ion batteries still have much room for improvement). A new 'wood battery' could allow the emerging sodium-ion battery technology to fit the bill as a long-lasting, efficient and environmentally friendly battery for large-scale energy storage."

An anonymous reader writes "Last October, we discussed Andrew 'bunnie' Huang's effort to build a complete open hardware laptop, called the Novena. bunnie has now posted a progress report on the laptop's design and construction, showing the latest revision of the board, the display, and a hack to use it as a secure router. bunnie says, 'At the end of the day, we're having fun building the laptop we always wanted — it's now somewhere between a python-scriptable oscilloscope, logic analyzer, and a laptop. I think it will be an indispensable tool for hacking, particularly for doing signal analysis which requires coordination across multiple protocol layers, complex trigger conditions and/or feedback stimulus loops. As for the inevitable question about if these will be sold, and for how muchonce we're done building the system (and, "done" is a moving target — really, the whole idea is this is continuously under development and improving) I'll make it available to qualified buyers. Because it's open-source and a bit quirky, I'm shy on the idea of just selling it to anyone who comes along wanting a laptop. I'm worried about buyers who don't understand that "open" also means a bit of DIY hacking to get things working, and that things are continuously under development."

An anonymous reader writes "South African Quentin Harley has picked up the $20,000 Gada Uplift prize for making the open source RepRap 3D printer design easier to build, cheaper to construct, and — most importantly — capable of printing more of its own parts. Lots of background on Harley and his RepRap Morgan are available on his website." A further goal of the RepRap Morgan project is to replace the Prusa Mendel as the default RepRap model. And they are on track to hit less than $100 in parts, excluding the printing bed. You can grab the hardware design and the controller firmware over at Github.

RockDoctor writes "After spending several years on supporting the uptake of 3-D TV, the BBC has accepted that people don't want it, and are turning off their 3-D channels following an uptake of under 5% of households with 3-D equipment. I can just feel the joy at not having wasted my money on this technology."

beaverdownunder writes "Melbourne restauranteur Paul Mathis has developed a one-character replacement for the word 'The' – effectively an upper-case 'T' and a lower-case 'h' bunched together so they share the upright stem – and an app that puts it in everyone's hand by allowing users to download an entirely new keyboard complete not just with his 'Th' symbol, but also a row of keys containing the 10 or 15 (depending on the version) most frequently typed words in English. Mathis has already copped criticism from people who claim he is attempting to trademark a symbol that is part of the Serbian Cyrillic alphabet (pronounced 'tshe,' the letter represents the 'ch' sound found in the word 'chew')."

MojoKid writes "The semiconductor market for mobile and hand-held devices has changed dramatically in the past six years and ARM has had to evolve along side it. ARM's IP focus allows it to dedicate all its resources to building a great design rather than committing to any single manufacturing process node, customer, or foundry. Architectural design and implementation is done very much in partnership with both foundries (TSMC, GlobalFoundries) and licensees like Samsung or Qualcomm. The difference between the way Intel goes to market and ARM's model is more nuanced than the simple ownership of manufacturing facilities. Owning its own fab means that Intel can tweak process technology to match the particulars of a given architecture (and vice-versa). It also gives the company far more flexibility when planning future nodes. If Intel feels that integrating Peanut Butter Silicon on Insulator (PB-SOI) is the best way to hit its performance and power consumption targets at 14nm, for example, it can make that happen internally. ARM, in contrast, is limited by the decisions of the foundry manufacturers it partners with."

Wayne2 writes "While there have been many attempts to preserve human knowledge in electronic format, it occurred to me that these attempts all assume that human civilization remains more or less intact. Given humanity's history of growth and collapse with knowledge repeatedly gained then lost, has anyone considered a more permanent solution? I realize that this could be very difficult and/or expensive depending on how long we want to preserve the information and what assumptions we make regarding posterity's ability to access it. Alternatively, are we, as a species, willing to start over if we experience a catastrophe, pandemic, etc. of significant magnitude on a global scale that derails our progress and sends us back to the dark ages or worse?"

Nerval's Lobster writes "Major IT vendors have been including custom-built wind- and solar-power farms in their datacenter construction plans. But while wind and solar power may be clean, they're often unreliable, especially by the standards of datacenters that need a way to keep operating through any unexpected surges or drops in power. How about saving the wind that generates the power? That might work, according to researchers at the federal Bonneville Power Administration (BPA), and U.S. Department of Energy's Pacific Northwest National Laboratory. A study published in February (PDF) outlined the potential benefit of pumping pressurized air into caverns deep underground as a way to store wind energy, then letting it out whenever demand spikes, or the wind drops, and the above-ground facilities need help spinning enough turbines to keep power levels steady. The technique, called Compressed Air Energy Storage (CAES) isn't new: existing CAES plants in Alabama and Huntorf, Germany (built in 1991 and 1978, respectively) store compressed air in underground salt caverns hollowed out by solution mining (pumping salt-saturated water out of concentrations of salt buried far underground and replacing it with fresh water). But implementing such a technique for datacenters might take a little work. The BPA and the Pacific Northwest National Laboratory have already identified, and are evaluating, sites in the Pacific Northwest that would be suitable for CAES underground reservoirs; the first, which could be located in Washington's Columbia Hills could—via existing CAES technology—store enough compressed air to generate a steady 207MW for 40 days of continuous usage, ultimately delivering 400 additional hours without adding any compressed air."

An anonymous reader writes "Sanders Kleinfeld explains how his experiences with a Makerbot device led him to the decision that 3-D printing hasn't quite arrived as a legitimate, consumer-friendly technology. Quoting: 'Waiting five hours for your Yoda feels like an eternity; you can play approximately sixty rounds of Candy Crush Saga in that same timeframe (although arguably, staring blankly at the MakerBot is equally intellectually stimulating). To make matters worse, I’d estimate MakerBot’s failure rate fell in the range of 25%–33%, which meant that there was around a one-in-three chance that two hours in, your Yoda print would fail, or that it would finish but once it was complete, you’d discover it was warped or otherwise defective. ... The first-generation MakerBot Replicator felt too much like a prototype, as opposed to a proven, refined piece of hardware. I look forward to the day when 3D printers are as cheap, ubiquitous, and easy to use as their 2D inkjet printer counterparts.'"

MojoKid writes "Ask any person who owns a dual-monitor setup and they'll likely tell you they couldn't fathom going back to a single display. But what if you could enjoy all the benefits of a dual-monitor configuration from a single monitor? Would you be game to reclaiming some desk space by trading in two panels for a single display? AOC aims to answer that question with its new 29-inch Q2963PM LCD monitor. Armed with an UltraWide IPS panel, this LED-backlit monitor boasts a 2560x1080 resolution with 21:9 aspect ratio, providing users with an extra wide panoramic view. With features like picture-in-picture (PIP) and picture-by-picture (PBP) built-in, workcaholics can multitask the night away from multiple video sources with plenty of horizontal real estate to play with. The funky aspect ratio limits the appeal of the Q2963PM for gamers currently; though if developers were to jump on board, a 21:9 monitor could offer a wider field-of-view of the action."

Nerval's Lobster writes "Apple's Nevada data center has been in the works for quite some time: a 2,200-acre plot outside of Reno will host a 90,000-square-foot datacenter that, in turn, will support the tech giant's cloud services. Apple will reportedly spend $1 billion over the next decade on the facilities, in return for significant tax abatements at the city, county and state levels. It will also fund and build a 137-acre solar farm, managed in conjunction with NV Energy, to power the datacenter (it will generate approximately 43.5 million kilowatt hours of electricity). The Reno datacenter will be the third Apple cloud facility in the U.S. that is powered largely or entirely by solar power. Sixty percent of the power for Apple's North Carolina datacenter comes from an existing solar-power farm near the facility; an Apple datacenter in Oregon uses solar power for part of its power load, but also uses power from wind and hydroelectric sources."