Phunction asks: "So what is available in the sturdy outdoor/industrial handheld market? I currently develop software for Casio's line of outdoor handhelds only slightly larger than regular, but they can't handle cold weather very well, below 0 celcius, and the screens are not to good in outdoor light. And I only know of one other manufacturer, At Work Computers, but they are almost 3 times the size of a regular pda. The OS is really not a concern, however the hardware should be water proof, handle low tempratures and have a good reflective screen that works well in direct sunlight (like the iPaq)."

Dagian asks: "Like many of you, I have CD's coming out of every orifice in my office. I have been looking for some time for a device to store my collection of software, music and other assorted goodies. The standard faux-leather CD binders seem inadequate. Have any of you come across anything that will organize CD's and - most of all - make them easy to tote around?" The traditional CD wallets work fine when you are talking in lots of 10-15, but what about lots of 20? 50? 100? CD Organization can get hard when the numbers get large. So, big or small, what portable carrying objects do you use when organizing CDs?

bluephone writes: "The EE Times has a story on a new chip from Winbond that can take ASCII or UNICODE text and convert it to either spoken English or Mandarin (the Chinese language, not the orange). The low-power chip scans the text and translates it into spoken phenomes and outputs it to a filter for smooth analog sound, or can directly output the digital signal. Imagine a cell phone with this, you can have your email read to you, rather than seeing a line at a time on a dinky screen, street directions from a website, or even Slashdot's headlines. :)"

dan writes "Overclockers Australia have a review up of the CPU Radiator Zen, a new approach to cooling your toasty CPU's. Rather than taking the traditional approach of a heatsink with lots of fins and a noisy 7,000rpm fan it uses radiator/heat pipe technology. The implementation of the unit is a bit flawed, but it is interesting to see where the technology is heading.. and if it can be done right I personally think this is where it will end up."

Deffexor writes "It looks like Hannibal of ArsTechnica fame has put Part 2 of his original comparison article between Intel's P4 and the Apple/Motorola G4e. In a nutshell, this second article covers the execution core, the AltiVec unit and SSE2, as well as a myriad of other interesting factoids. An interesting read, if not a little technically intense for those of us with less than a CE/EE degree. Have at it boys!"

Bill Kendrick asks: "I've been reading a few PDA-related Usenet groups lately, and I've been noticing quite a number of problems people have been having when trying to sync their Palms (and other PDAs) under WindowsXP." According to Palm, the new Palm Desktop (version 4.0.1) should be compatible, yet it seems that a lot of people are experiencing problems. If you've managed to get a Palm to sync successfuly with a Windows XP system, what did you have to do to get things working?

gary.flake asks: "My group at NECI is in need of a machine that can address 64GB of ram in a single process. This means we need 64-bit addressing. We'd prefer to go with a Linux solution because all of our development is under Linux. We've spec'ed out some reasonable machines (Dell can do 32GB, and Compaq can do 64GB) but they seem to be lacking in that they can only be loaded up with 4 x 800Mhz Itaniums. We would really like to have more processing power (2 Ghz x 4 would be a dream). Does anyone know of any monster Itanium machines that will meet our needs? (Please, no Alphas). Finding such a beast is harder than you'd think."

kilaasi writes "Some hard-core game-developers from Finland is making super-optimized games for the iPaq and similar devices, tweaking and tuning every bit of piece there is. These are old Commodore and Amiga-programmers that know the virtues of small-is-beautifull."

Anders writes "infoSync has a story and pictures of Sharps new Linux-device SL-5000D, which runs on Embedix Linux 2.4 with Jeode's PersonalJava, using Qt/Embedded and the Qt Palmtop Environment, and will be capable of running applications coded either in Linux or in Java."

Peter Dyck writes: "This summer Compaq divested itself of the Alpha technology. The Alpha tech was purchased by Intel who most likely will bury it after grafting its best aspects to their own 64 bit IA-64 system. However, the non-exclusive terms of the deal allowed Samsung to continue producing and developing the best 64-bit processor architecture there is today. Now, as a happy owner of a four years old DEC AlphaPC164 I was delighted to see this announcement by Samsung Electronics. In short, the upcoming UP1500 motherboard will house a 64 bit 800+ MHz Alpha 21264B CPU, 4 GB DDR memory, 10/100 Mps LAN, USB and yes, it will run Linux."

Unhappy Camper asks: "I had a Presario 1800 laptop go bad. A couple of months out of the 1 yr warranty. The local Compaq approved repair shop blames a bad power connection at system board. Their proposed solution: $1500 replacement system board. I could replace the laptop for less. What are my options to recover data off of the functional hard drive? The computer works, but it doesn't get a charge from the battery or a wall outlet. Does anyone know of a $200 rig to allow me to connect it to a desktop IDE controller/USB slot/whatever?"

Rogerborg writes "So, I buy a used 6.5Gb IBM Travelstar on eBay, only to find that I didn't caveat emptor enough, and it's password protected. No problem, I'll just, uh... uh... what will I do? According to this discussion at geek.com, the password is stored on the platter, not the controller, so swapping controllers won't help. If the controller finds a password, it refuses all access to the disk. Mounting the drive as a slave in an IDE converter, I can't fdisk, format or otherwise access it under Linux. DOS won't even recognize that the drive is there. I've even tried it in a freaky system running VxWorks. The drive mounts, but can't be accessed or formatted." How rude! Are there any utils out there that can be used to unlock the device so it can be used?

Anonymous Coward writes: "People at the at Chinese University of Hong Kong have developed a reconfigurable computing card which uses the SDRAM memory slot instead of the PCI bus. Measurements in the paper show greatly improved bandwidth and latency - why aren't more people using this idea?"

tuxtattoo writes: "I was talking to a buddy of mine tonight, and he told me about a paintball ATV made by Tippmann. it's called the Hellhound, and it's got everything you need for a nice day at the paintball field. Some of its features include a variable speed trigger which is attached to a high speed, 10 barrel, 50 rounds/second cannon. it also comes equipped with 2 side mounted tippmann model 98's (that would be 2 more paintball guns one on each side :), a 6,000 round hopper, heavy duty winch, and not to forget the what looks to be a self fed grenade launcher. there are many other features that come standard with this model, but NO floor mats or cup holders." I think this has been around for a while, but I played paintball yesterday (and I'm feeling it today) so this submission just seems apropos.

Reader samjam sent in an interesting piece about his dream handheld PC, sort of a cross between a subnotebook and a wireless web pad, with the kitchen sink thrown in. Mmmmm, light-emitting polymers. I can't decide if this kind of thing is right around the corner or just a fantasy - after all, normal notebook computers sell, and at a nice high premium - and web pads are less than successful - why would anyone spend the money to develop a device like this?

txsable asks: "Is any manufacturer making a new-model laptop computer with a trackball? I can't stand touchpads, and the "accupoint" device used by IBM and other isn't much better. My favorite is a Dell Latitude XPi CD that belongs to my office, but (1) it's a Pentium 133 and (2) It's not mine!" I used to remember laptops that had those trackballs that attached to the side. They were alright, but their main drawback was that those things always broke, or at best, would fall off because the attachment didn't fit right. Are there any laptops out there that actually have the trackball integrated into the unit in a position that feels fairly natural, and also doesn't get in the way of typing?

Beans writes "Today is a sad day for the engineering calculator world. HP calculator department is closing. www.calc.org has the scoop. Leaving employees just announced it on comp.sys.hp48. You can check google groups for the original posts."

An Anonymous Coward writes: "Running on Newsforge/Linux.com is a hardware review where Slashdot's Krow took a couple of OmniCluster's Slotservers and and built a cluster configuation inside of a singe host computer (and even had DB2 running on one of the card's inside of the host). Could something like this be the future of computing where for additional processing power you just kept adding additional computers inside of a host?"

simpleSilly asks: "We are currently using iPaq's with 802.11b in a wireless scenario. We have about 30 of them in use at once. We need to expand to about 100 but we are looking for a lower cost solution for a special application. We really have a very very simple application. We only need to record keypresses from the user and send them to a server. The user only needs 6 buttons. They do not even need a screen (although it's a plus) no sound is needed. We do need them wireless and battery powered. The wireless range needs to be about 200 ft. We need to have 100 of them working at once. We need them durable too. Any ideas slashdot readers?"

trefoil asks: "My friend's father is a farmer who has to tend to his huge wheat fields for most of the day. He is looking for an option to have a full computer system on his tractor, however it bumps and jostles around a lot. He was curious as to what type of options besides pda's does he have, for something that can 'take a beating and keep on ticking'. Specifically what we're looking for is something shockproof, hopefully not to expensive, the less "moving parts" the better. Any ideas out there?" If such a solution does not exist that's exact to the one described here, how close can today's market get to a sturdy computing solution that could handle life on the road...or farm?