sysadmn writes "Mini-ITX is a relatively new form factor for PC motherboards measuring only 170 mm x 170 mm. The folks at Mini-ITX.com have this page of interesting projects, including full systems built into 1/10 scale models of a Ford Focus Rally car and a VW Beetle. Another project recycles a SparcStation IPX from 40 Mhz Sparc to 800 Mhz Via C3. Not to be outdone, motherboard maker Via has its own Mini-ITX project page, with several cool automobile systems."

An anonymous reader writes "There's still the alphabet soup and corporate conflicts regarding cell phone standards in the U.S. but... there might be some hope for a single-chip GSM phone, which might open up some interesting possibilities."

EyesWideOpen writes "The iSCSI technology, which allows computers to connect to hard drives over a network connection such as a company Ethernet network or the Internet, requires only minor changes before the Internet Engineering Task Force endorses it as a formal version 1.0 standard. A final round of comments has been completed on the technology according to the Storage Networking Industry Association, the subgroup that led the creation of the iSCSI, and as a result companies now can start building iSCSI products."

Beau Mundt writes "You guys haven't touched on the small form factor PCs in a while, thought you would be interested in this review of a Lex System SFF PC. Its arguably the tiniest PC around and could be used for many cool things like a Linux gateway, a wireless workstation, or just a silent small foot print system. The other neat thing is the reviewer stuffs a P3 1.26 and a Radeon 7500 into the system. Perfect for bringing to LANs!"

An anonymous reader asks: "I've done assembler for the 6809, 68000, 8085, MIPS and ARM architectures over the years. But - I've never learned assembler for the most common architecture out there. I would like to change that. I can roughly follow my way around x86 disassemblies, but I'm not as good at optimizing/fine tuning bits of assembler because I am not intimately familiar with all of the addressing modes etc. I would like a book that is targetted at people like me. I would like to be able to fine tune, say a blitter in x86 assembler. One thing I do not in a book is something that is trying to teach me assembler programming in general. Most assembler books seem to fall in the latter category. Are there books out there that might prove useful to me?"

TellarHK asks: "My aunt and uncle, both completely unfamiliar with computers, are looking to replace a broken word processor with something new. They'd like to either spend as few dollars as possible on a computer, or replace the word processor. Silly me, I mentioned I had a spare PC kicking around. It's a Digital Equipment 'Starion 930' Pentium 100 with 40M, and onboard video of an unknown type. As this machine is going to be used for word processing, I need an OS that will work with my newly dusted-off Lexmark Z11 printer. So what are my options? Will QNX handle the limited video and printer? Is there a WYSIWYG solution for FreeDOS? Is there a chance in hell any Linux distribution can give me graphics? I've got a whopping three gig drive in there. What can I do with it?"

EyesWideOpen writes "On Wednesday Palm began notifying registered m130 owners "that they were entitled to a full refund, including taxes paid on the PDA" for misleading them about the actual number of colors the product supports. The m130 was originally advertised as supporting 65,536 colors when in actuality it can only display 58,621. Owners who choose to forfeit the refund and keep the PDA could instead download a free version of the video game SimCity." Looks like a great deal for those who don't care about the bit depth of their PDA, and a way out for those who do.

mackstann writes "StorageReview has some info on Maxtor's new 80GB hard disk platters. The new drives based on the 80GB platters will come in capacities up to 160GB, with some having Serial ATA and/or 8MB caches. They are also resurrecting the (formerly Quantum) Fireball name, shortening their warranty (previously 3 years, now 1 year), and adding some slim (38% thinner) drives to their lineup." New products like this make me feel like I'm not keeping up fast enough. I bought a 100GB drive last spring and it's not even half full yet!

JeroenH writes: "Sept. 2, 2002, Sony announced the DSC-FX77. It's a 4 megapixel, fixed lens digital camera with a special feature: Bluetooth. When the camera takes a picture, it will be sent directly through the Bluetooth link to a nearby computer, giving you nearly unlimited space for your photos (well, at least as much as fits on your hard disk). At this stage the camera can only send photos to a computer, but in the future it should be possible to control the camera remotely. Will the wardriving of the future include scooping up pictures? Time will tell..."

scompt asks: "I've been looking around for some information on building a custom docking station for my Dell Inspiron 8000 laptop. The barrier is obviously the odd, jumbo connector on the back. Does anybody know the pinout of it? Hacking the insides of a laptop is almost a lost cause, but opening up the docking connector might provide a nice way to expand a previously dead end box."

full-case asks: "Due to some interesting politics at the ISP where I work, I can run two machines in the colocation room for free if and only if they both occupy the same case. As it turns out, I have two (standard ATX-form-factor) motherboards with associated sundry that would really like to be colocated, and I know I've heard of cases that will accept multiple motherboards, but I can't for the life of me find one that will take the right size. The only ones that I can find are either in the $6k price range, or this sort of thing, which requires special ultra-tiny motherboards. I figure I would be served better by having a 4U case divided internally to mount two motherboards; both machines will fit nicely into a 2U case separately...but does such a beast exist, or can it be (cheaply) assembled from parts?"

volsung writes "A lot of us want portable music players with Vorbis support, right? Well, Xiph.org has decided to help speed the process by releasing their integerized Vorbis decoder, named "Tremor," under a BSD-like license. Tremor is a Vorbis decoding library written for CPUs without floating point hardware, like most handheld devices use. It was previously a proprietary library--licensed by theKompany for their Sharp Zaurus player, among others--but now it's available for everyone to use. The release page also gives contact information for many of the popular hardware manufacturers. If you want Vorbis support in your hardware, now is the time to send some emails! (Also, please say thanks to the Xiph.org crew with a donation if you can.)"

Mortin writes "The folks at Icrontic have a neat article up titled "The Broadcast Box." They unleashed a room full of designers to build an affordable system, and this 24-page article shows what they came up with, along with benchmarks, design specs, and cost analysis."

Alexander Burke writes "In the 27,000-square-foot Carmel, Indiana home of Scott Jones, head of Escient Technologies, fireplaces ignite and drapes close on demand, televisions appear as if by magic and the ceilings play music. Touch-screen panels throughout the house run lights, security, heat and cooling systems, and video and audio libraries. Speakers are embedded in the walls and ceilings behind the plaster. The home includes a movie theater that seats 20 and has a wine cellar accessible only by fingerprint scan. Ted's outfit brings us more information."

An anonymous reader writes "'An innovative, pedal powered, wireless network provides Internet access to off-grid villages in Laos,' using LINUX-based software which is being localised into the Lao language. The 'Jhai Foundation's makes the Jhari computer, which consists of a single-board PC (the MZ-104 based upon the Mach-Z single-chip computer - equivalent to a 133 MHz 486 system), uses "embedded" circuit boards, the sort that are used in industrial equipment, and is devoid of moving parts such as fans or disc drives, made to operate for long periods of time without service or attention.'"

Pawel Kot writes "Have you ever thought why does your graphics card has so much memory? Do You think you have not enough RAM or awfully slow swap file? Do you need fast ram-disk or diskless machine? Go for it! Take one of these cheap 128MB graphics cards and enjoy the speed. Michal Schulz wrote a good description on how to take the advantage of not used video card memory."

Ch_Omega writes "Sharps Linux-based Zaurus SL-5500 is a wonderfull PDA with lots of features, but it's also a bit on the large side. Unknown to most, Sharp also has a slim and sleek version available, namely the SL- A300. It's so far only available in Japan, but Infosync has screen shots!." And it weighs only 120 grams, imagine. A trip to Akihabara anyone?

Simon (S2) writes "do you remember the cappuccino pc? There is a new release of it called Mocha. The Mocha P4 PC size advantage makes it ideal for places where space is at a premium or for those who work in several fixed locations at once and want to be able to access the same data everywhere. Mocha P4 is a PC that is so flexible, efficient, compact and portable technically knocks down all existing desk top PCs. Choosing a big and bulky inappropriate PC has become an obsolete way of thinking. The over all technology of other mini-book PCs around is still far from our achievement today. Take advantage of the new breed PC of tomorrow and experience the next generation way of computing."

Mike Bouma writes "AnandTech has reviewed ATI's latest mobile graphics solution. According to the reviewer this small and energy efficient chip is the new king when it comes to mobile graphic chips for Notebooks. Also John Carmack is apparently very positive about the chip and also stated that Doom 3 will be able to run smoothly with this new Radeon chip."

lpq asks: "I've recently starting doing some computer repairs and don't feel organized when it comes to tools. I'm wondering what any people who do computer building/repair use for a portable kit? Are any of the toolkits any good? Or are they just cheaper tools than I might already have with a cheap vinyl case? I saw some expensive kits -- but it looked like one of the main difference is rather a driver device with scads of fittings, the more expensive kits seem to go with separate tools. One had 15 socket screwdriver type tools where I get the same in less space with a ratcheting screwdriver and an adaptor for sockets. I noticed many kits with soldering irons -- not something I've had a need for in most computer upgrades / repairs. Ideas? Basics things to have?"